TW-210 High Voltage Arc Generator
The step up module arc generator has been potted and sealed with epoxy resin. The transformer primary has two windings, one of which is a set of thick copper wires as the main winding and a set of thin copper wires as the feedback winding. The secondary output is high voltage. The two copper wires in the transformer, one thick and one thin, are the positive pole, which are the main winding tail and the feedback winding head respectively, and are connected to the positive pole of the power supply. When the input terminal is connected to a 3.7V-7.2V power supply and the secondary high-voltage output is not connected to a high-voltage rectifier diode and capacitor, the output two-stage line terminals can produce a purple high-temperature arc ≤1 cm long without any electric shock sound, but the temperature is very high and can Easily light up paper and cigarette instantly.
| Input Voltage(V) | 3.2-4.2 |
| Working Current(A) | 1.7-2.5 |
| Rated Power(W) | 6.3--9.3 |
| Output Voltage(KV) | (7.3-7.5)*2 |
| Working Frequency(KHz) | 18-20 |
| Arc Distance(mm) | 5-6.5 |
| Length of Input Wire(mm) | 50(Customizable) |
| Length of Output Wire(mm) | 50(Customizable) |
| Material of High Voltage Wire | Teflon copper wire |
Arc Igniter: This lighter can instantly ignite the paper, and the purple electric arc is very beautiful.
Simpler DIY: Super mini size allows for broad application, such as electronic lighter, DIY, learning and so on.
Safe to Use: The arc transformer is encapsulated in resin, which ensures safe working performance and good stability.
Working Tip: 3.7V 18650 lithium battery is recommended, and the output pulse voltage can get up to 0.5kv‑0.8kv.
Easy to Install: Light in weight and compact in size as well, the installation is very convenient to complete.
How to Use:
When the input terminal of this product is connected to a DC 3‑5V power supply, and the secondary high voltage output is not connected to a high voltage rectifier diode or capacitor, the output two stage line terminal can generate a purple high temperature arc with a length less than or equal to 0.8 cm. There is no crackling sound, but the temperature is very high. You can easily and instantly light a paper and a cigarette, and even the very thin iron wire can burn with sparks.
1.Question:How does the arc lighter work?
Answer:This arc can ignite paper because it essentially a stream of electrons flowing at a very high speed through a section of ionized air. These electrons, because of their high velocities, transfer a large amount of energy into the piece of paper placed in between the two electrodes. This energy causes the paper to ignite.
2.Question:Are electric arc lighters good?
Answer:Plasma arc lighters are considered to be a safer and more environmentally friendly alternative to traditional butane lighters. They produce a small, concentrated electrical arc that can ignite a variety of materials.
3.Question:Are arc lighters bad for your eyes?
Answer:Plasma arc lighters are generally safe to use, but it's important to avoid looking directly at the arc when it's activated. The intense light and heat produced by the plasma arc could potentially cause damage to the eyes if stared at directly.
