Professional stun gun, mosquito swatter, arc lighter, high voltage transformer manufacturer since 1990


Fire drill special electronic ignition high-energy ignition time big energy ignition XLGND12 high-energy ignition device

by:Tianwang     2020-06-26
Fire drill special electronic ignition high-energy ignition big energy ignition XLGND - for a long time 12 high energy ignition device in order to adapt to the development of fire drill electronic ignition, we specially developed a long time the ignition energy XLGND - 12 fire drill for high-energy ignition, overcome the traditional high energy ignition lighter for a long time the disadvantages of high temperature damage to internal components, sustainable lighter more than 30 minutes, almost no temperature, ignition operation is simple, safe and reliable, and environmental adaptation ability strong, reliable lighting gas, natural gas, liquefied gas, coke oven gas, converter gas and producer gas, gasoline, atomized diesel, gasoline, etc. The high energy ignition device can also be used for gas burner, fuel industry, the ground flare system automatic ignition, has the advantages of long life and reliable ignition, high temperature resistant, anti coking ignition end, self-purification ability. XLGND - 12 high energy ignition, fire drill special igniter, technical parameters: 1, the power supply voltage: 220 v + 10% for 50/60 hz 2, suitable fuel: gas, light oil, heavy oil, booster and heat-resistant: 1000 ℃ for a long time, instantaneous 1300 ℃, spark energy: 12 j. 5, spark frequency: 6 - 10 times/SEC igniter shell: material: metal case three, ignition rod and 1 ignition cable, ignition rod front end 2520 high temperature alloy material; Semicond high temperature material 2, conventional ignition rod diameter Φ 12/16/18, special circumstances ignition rod diameter, length, install screw, connection mode, can be customized according to user requirements. 2, special high energy ignition cable for cable, length of supply according to user requirements. 4, installation and wiring: 1, install the ignition rod on the burner mounting holes, and screw down the. Ignition installed on the ignition end of stem 30 ~ 50 mm before burning mouth nozzle, gas burner take a smaller distance, fuel burner for greater distance. The ignition rod with high voltage cable connected to the ignition ignition output socket rear panel. 2. Power cords on the front panel of the power socket, ignition, ignition just by turning on the power switch. Fifth, note: 1. The igniter for the high energy ignition, ignition end resistance to carbon deposition, in the case of carbon deposit can also be lighter, so the user is in use process does not need to clean up the ignition end, can be at ease use. 2, the fire which can be used for a long time the ignition, the improvement and the ignition frequency is stable, sustainable and stable work continuously for 30 minutes. 3, the ignition rod of the front is a special structure, the user cannot be used after ignition rod sawing or cut.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...