Professional stun gun, mosquito swatter, arc lighter, high voltage transformer manufacturer since 1990


Flame detector in use process need to pay attention to what issues?

by:Tianwang     2020-06-25
Flame detector is a device used to detect combustion chamber or the intensity of the burner flame, so in the use of flame detector need to pay attention to what? Flame detector manufacturer to tell you. 1, the flame detector is the main component of fire protection to the chamber of a stove or furnace and burner flame for correct detection, adequate sensitivity and anti-interference ability, element has a certain temperature resistance, oxidation resistance and service life, can signal measured in a reliable way. What forms of flame detector probe method is used, should be according to the properties of the flame were related to the fuel selected. Without a long time to run the test and obtain the certificate of approval of flame detector identified should not promote adoption. 2, the installation position and quantity of flame detector related to the furnace and the specific structure of burner, and the characteristics of fuel, and the function of the safety protection requirements in relevant. In the chamber of a stove or furnace design, it should consider the arrangement of the flame detector and its event horizon. Should be put into operation, on-site commissioning, to determine the better surveillance Angle. When monitoring the whole furnace flame is used, should be in the top four side of the upper chamber of a stove or furnace burner, respectively installed flame detector; When monitoring a single burner or a layer of flame, at least in the next, compared with the previous and the middle layer of burners are equipped with flame detector. The burner flame detector probe, should be sensitive extents, flames when the flame may from observation section, should adjust the probe installation position. Design and installation, should consider the possibility of operating personnel to conduct the adjustment. 3, in order to ensure the stability, the flame detector probe work from soot pollution, should have enough wind pressure and air volume of dedicated fan ( And have a spare) To probe the supply filtered clean the cooling air, to ensure the positive pressure in chamber of a stove or furnace, furnace smoke not to probe in direct contact, avoid the probe component temperatures exceed allowable values. 4, element to the flame detector should be self-checking function, the element has a failure, can automatically sends a signal. Above the flame detector in use of the four items, hope to be of help for more information please pay attention to
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...