High-energy ignition in order to ensure the service life and high energy ignition performance, reduce the occurrence of failure, we must strengthen the daily maintenance of high energy ignition device.
A, high-energy ignition device configuration and the selection of high-energy ignition price high energy ignition system is mainly composed of high-energy ignition, firing gun, ignition cable of three parts, can be directly used to ignite gas, liquefied petroleum gas, diesel, kerosene, crude oil, residual oil, etc.
The choice of high-energy ignition device is according to the use of industry, ignition medium to choose to use different applications and different light medium choose different models, so as to save cost, also can achieve ignition effect you want.
If you choose to not appropriate, ignition cable length is too long, can affect lighter effect, the number of ignition is increasing, longer than using rules, will affect the service life of the device.
Two, use method 1, a set of relatively high energy ignition, ignition rod, is the most easy to bad for internal use ceramic parts, so can't fall, don't often landed in the process of using firing gun to clean up the ignition end, production of high-energy ignition, the ignition end resistance to carbon deposition, in the case of carbon deposit can be lighter;
2, device without connecting cable, firing gun, not electricity, otherwise it will damage the device;
3, some devices are operated at high load device, shall strictly comply with the rules of working cycle;
4, equipment maintenance must be carried out after the cut off power supply for 5 minutes (
Ensure that the surplus electric charge through a discharge resistor capacitor discharge is completed)