Rechargeable mosquito killer racket

No mosquitoes or flies can escape from this electric flyswatter. A good electric flyswatter is one that is capable of absorbing flies. Super voltage, ranking the first in the country. The flyswatter can kill all flies at one time with no flies escaping. It is really amazing, and will not give rise to electric shock.

Features：

1. Tianwang Electric Flyswatter uses double-layered (one sparse and one dense) electric screens, and two AA batteries to drive the high-voltage integrated circuit to produce a high voltage of about 7000v (which produces weak current, although having a high voltage, harmless to humans and animals). There is a strong electrostatic field between two layers of electric screens. When mosquitoes, flies and other flying insects get close to the electric screens, they will be absorbed into between these two electric screens, and be killed instantly.

2. There are many types of fly racket electric available on the market. Since the voltage of their electric screens is low (generally around 1000 volts), these products may be effective in killing mosquitoes, and their effectiveness is limited to kill flying insects with larger size. Tianwang fly swatter can be used to kill a wide range of flying insects, as long as they are not too big. 

3. Since the voltage of the electric screen of Tianwang electric mosquito swatter is high, it can make the air ionized in working to produce a certain amount of ozone and negative oxygen ions, helping disinfection.

4. Tianwang Electric Flyswatter kill mosquitoes and flies without producing any pollution, odor, resistance-to-insecticide or environmental restrictions.

5. The high voltage circuit of Tianwang Electric Flyswatter is Vacuum packaged with epoxy resin, and is resistant to shock, moisture, corrosion and high temperature. It will not be damaged in normal use. It can be refunded or replaced if any quality problem occurs during the first year after it is purchased.

1. Use Method:

       1.  Switch function: For the push plate switch, the position OFF means the swatter is off.  The position ON1 means the swatter is working with the light off, and the position ON2 means the swatter is working with the light on. The round key is the work button. Press it to start work and release it to stop work. When the electric flyswatter isn’t used or is recharged,put the push plate switch to the position OFF.

       2. For capturing mosquitoes: turn the switch to ON1 or ON2, press the work button and hold it down, and place the screen with larger wire spacing of the electric flyswatter close to the mosquitoes. Then the mosquitoes will be absorbed into the electrical screen and killed. Turn the screen with larger wire spacing down and release the work button, and the mosquitoes will fall off.

       3. For capturing flies: turn the switch to ON1 or ON2, press the work button and hold it down, and place the screen with larger wire spacing of the electric flyswatter perpendicular to the plane where the flies are on and 20-30cm away from the flies. Wave it quickly towards the flies, and the flies will be absorbed into between two layers of electric screens (see the Schematic for demonstration of using methods).  Keep electric shock for 2-3 seconds to kill the flies. Turn the screen with larger wire spacing down and release the work button, and the flies will fall off.

       4. For capturing other flying insects: similar to that of capturing mosquitoes.

       5. Recharging method: Tianwang Electric Flyswatter is rechargeable, and is not used while connecting to the power supply. When it needs to be recharged, take out the recharging plug at the rear of the product handle, and insert it into 220V AC outlet (the recharging power supply and socket installation must comply with relevant safety regulations), and the red recharging indicator turns on. The recharging time is 10 to 12 hours. After fully recharged, the swatter can kill insects continuously for 60 minutes. If it is the first time to recharge the product, or the product is recharged after it is not used for a long time, the product should be continuously recharged for 12 hours .In order to ensure optimal performance, only recharge it when the battery is low. In case of a new product, you can use it until the battery delivered together with the product runs out before you recharge it. The product is provided with recharging protection. When the battery is fully recharged, recharging will be stopped automatically, but the recharging indictor is always on. If the product is not used for a long time, recharge the product every 3 months in order not to affect the service life of the battery.

       6. When there is any insect body attached to the electric screens, remove it with the small brush delivered together with the product(located in the recess on top of the recharging plug) or clean it off with a dry towel. If the product is moistened, resulting in a drop in the voltage of the electric screen and reduced effectiveness of killing insects, the product can be blown dry or be dried under the sun.