High Voltage Generator for Defibrillator
This security Medical Equipment Ignition module is widely used in the medical field of Automated External Defibrillator. The original AED uses industrial alternating current to defibrillate directly, which will be more dangerous. Therefore, in addition to the internal Defibrillator (ventricular tremor) by alternating current during cardiac surgery, DC electric defibrillate is generally used.The working principle of the high voltage generator for defibrillator is that it is powered by DC power supply with different volts, and the transformer is driven by the oscillation circuit to carry out one-time boost, and the voltage doubling rectifier module to carry out the second boost, finally forming DC high-voltage discharge.
|
Model No. |
TW-G-AF-X-1 Medical Equipment Ignition module |
|
Product Size |
L60mm*W32mm*H24mm |
|
Input Voltage |
7.4V |
|
Output Voltage |
30KV |
|
Weight |
78.6g |
|
Current |
3000MA |
|
Ignition Distance |
18mm |
|
Input Wire Length |
100mm |
|
Output Wire Length |
230mm |
|
Input Wire Diameter |
Φ1.2±0.03mm Copper Wire:φ0.15mm*7 |
|
Output Wire Diameter |
Φ2.2±0.03mm Copper Wire:φ0.15mm*7 |
|
Notes |
*The above parameters are measured by manual/instrument, there will be 10% error, hope for your understand |
This high voltage pulse module is widely used in in the medical field of Automated External Defibrillator.
Defibrillation and cardioversion is a transient high-energy pulse that acts on the heart, it is an instantaneous high-energy pulse that acts on the heart. The general duration is 4~10ms, and the electric energy is 40 ~ 400J (Joule). The Medical Equipment Ignition module of
defibrillation is called defibrillator, which can complete electric shock cardioversion, namely defibrillation. The original defibrillator uses industrial alternating current to defibrillate directly, which often causes dangerous due to electric shock. Therefore, in addition to the internal defibrillate(ventricular tremor) using alternating current during cardiac surgery, DC electric defibrillate is generally used.
1. If this size is not applicable, do you have other sizes for your high voltage shock booster module?
Yes, we have many other sizes Medical Equipment Ignition module
.By the way, we can customize the sizes according to your requirements.
2. The product output in your picture is two lines, can you add terminals?
Yes. We can customize product terminals according to your requirement.
3. Can the output of the product be made into pin type?
Yes.
4. How many volts does the high voltage generator for defibrillator input have?
The conventional input of our high voltage pulse module is 3.7vdc, 4.8vdc, 7.2vdc/AC,12VDC/AC. If you need other parameters, you can contact customer service for proofing and customization.
