High energy ignition device consist of igniter, firing gun and shielded cable.
Ac 220 v or 110 v power frequency, by boosting rectifier transform into dc current ripple, the storage capacitor charging.
Electricity flows through the tube when the capacitor is full, discharge, choke, shielded cable transmission to firing gun semiconductor igniter, form a high-energy electric spark.
When the ignition device to stop working, the rest of the charge on the capacitor discharge through the discharge resistance.
When using high energy ignition: 1 high energy ignition when not connected to cable, firing gun, do not electricity.
Otherwise it will damage the device;
2 before use must check the high-energy ignition, device should be connected correctly, reliable contact, firing gun ignitor end into fuel area from 100 to 200 mm;
3 some high-energy ignition devices are operated at high load, should strictly abide by the working cycle;
4 high energy ignition during downtime for a long time, must cut off power system;
5 high energy ignition of maintenance should be carried out after the cut off power supply for 5 minutes.
Ensure that the surplus electric charge through a discharge resistor capacitor discharge is completed)