The use of high-energy ignition technique in coal (
Oil and gas)
Boiler, petrochemical industry, metallurgy, aerospace and so on industrial situations, ignition, need a special tool -
- - - - - -
High energy ignition.
High energy ignition despite the use of a certain period, but if used properly, can extend the service life of high-energy ignition.
First of all, when the ignition, must first open the ignition device, and then spray or jet ignition.
Second, the use of high-energy ignition ignition time as short as possible, it is advisable to keep within 30 seconds.
If the ignition time more than 30 seconds, need to have a rest again after 1 minute to use;
And during ignition, for safety, combustion-supporting wind must be closed, for ignition success to open the combustion-supporting wind again, when the fire is to increase the fire.
Again, fuel atomization effect to good, so can greatly improve the success rate of ignition, reduce the use of high-energy ignition frequency and ignition timing.
Operators to learn more about the use of high-energy ignition considerations, according to the correct operation process using high energy ignition, coupled with the above three little skill, can effectively extend the service life of high-energy ignition.